Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCA871A - Europe - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for FLEX NORYL™ Resin WCA871A - Europe:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Механические свойства - Теплофизические свойства - Электрические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
FLEX NORYL™ WCA871A resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 105C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCA871A resin is intended for evaluation in wire insulation and cable jacket applications in light colors. It has a Shore A Hardness reading of 84 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Показатель текучести расплава, ПТР 15 г/10 мин ASTM D 1238
Температура 250 °C -
Нагрузка 5 kg -
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Напряжение при разрыве 18 МПа ISO 527
Удлинение при разрыве 50 % ISO 527
Данные ASTM
Предел прочности 18 МПа ASTM D 638
Относительное удлинение при разрыве 140 % ASTM D 638
Твердость по Шору А 87 - ASTM D 2240
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 3 мм -
Glow Wire Ignition Temperature (GWIT) 825 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 мм -
Электрические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Относительная диэлектрическая проницаемость, 1МГц 2.6 - IEC 62631-2-1
Коэффициент диэлектрических потерь, 1 MГц 28 E-4 IEC 62631-2-1
Сравнительный показатель пробоя 600 - IEC 60112
Данные ASTM
Удельное объемное сопротивление >1E15 Ом*см ASTM D 257
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1060 кг/м³ ASTM D 792
Особые свойства и характеристики
Добавки
Антипирен
Особые показатели
Огнестойкий
Доступность материала по регионам
Европа
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.